LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 353 (Disc Brakes) >> Adjustments & Inspections >> Brake Pedal Push Rod Inspection

Brake Pedal Push Rod Inspection

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake pedal pushrod from the brake pedal.
  2. Inspect the brake pedal pushrod eyelet bushing, if equipped, for cracks and/or excessive wear.
  3. Reposition the pedal pushrod boot toward the front of the vehicle to expose as much of the pedal pushrod as possible.
  4. Inspect the brake pedal pushrod for straightness.
  5. If the brake pedal pushrod eyelet bushing exhibited cracks and/or excessive wear, then the bushing requires replacement.
  6. If the brake pedal pushrod is not straight, then the pushrod requires replacement.
  7. Return the pedal pushrod boot to its original position on the pedal pushrod.
  8. Connect the brake pedal pushrod to the brake pedal.
scientia non olet · About LEMON Manuals