EVA Vibration Sensor Placement
WARNING: This page does not describe the selected car, but rather 58 other vehicles, including the 2003 Saturn Vue, 2003 Saturn L300, 2003 Saturn Ion 3, 2003 Saturn Ion 2, and 2003 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
Proper placement of the Electronic Vibration Analyzer (EVA) 2 (J-38792-A) vibration sensor (accelerometer) is critical to ensure that proper vibration readings are obtained by the EVA. The vibration sensor should be placed on the specific vehicle component identified as being the most respondent to the vibration. If no component has been identified, install the sensor to the steering column as a starting point.