Drive Pinion Flange/Yoke &/Or Oil Seal: Notes

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The internal components of the torque tube assembly cannot be serviced separately. If corrosion exists that cannot be polished off, or there is excessive scoring or wear, the torque tube must be replaced as a complete assembly.

NOTE: Required Tools: Seal Installer (J-44915).