Torque Specifications
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Axle Shaft (Hub) Nut | 118 (160) | |
| Ball Stud Castle Nut | 40 (55) | |
| Large Seal Clamp (Inner & Outer) | 130 (174) | |
| Lower Control Arm Nut | 83 (113) | |
| Small Seal Clamp | 100 (136) | |
| Stabilizer Shaft Link Nut | 17 (23) | |
| Tie Rod Ball Stud Nut | ||
| First Tightening Pass | 22 (30) | |
| Final Pass | Tighten Additional 120 Degrees | |
| Wheel Lug Nut | 100 (140) | |