LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Disc Brakes) >> Removal & Installation >> Power Brake Booster >> Installation

Power Brake Booster: Installation

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Install seal and booster to cowl. Install booster washers and stud nuts. Tighten nuts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure. If master cylinder was removed, bleed brake system. See BLEEDING BRAKE SYSTEM .

scientia non olet · About LEMON Manuals