LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Disc Brakes) >> Removal & Installation >> Park Brake Shoe >> Removal

Park Brake Shoe: Removal

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear brake rotor. See REAR BRAKE ROTOR .
  2. Remove the rear wheel bearing/hub. See REAR WHEEL BEARING/HUB .
  3. Rotate the parking brake adjusting nut until all park brake shoe adjustment has been removed.
  4. Remove the parking brake shoe retaining spring.
  5. Remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly.
scientia non olet · About LEMON Manuals