LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Disc Brakes) >> Removal & Installation >> Park Brake Shoe >> Installation

Park Brake Shoe: Installation

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe over the actuator assembly.
  2. Install the parking brake shoe retaining spring.
  3. Adjust the parking brake shoe-to-drum clearance. See PARKING BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS.
  4. Install the wheel bearing/hub. See REAR WHEEL BEARING/HUB .
  5. Install the rear brake rotor. See REAR BRAKE ROTOR . Tighten fasteners to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals