LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Disc Brakes) >> Removal & Installation >> Park Brake Shoe Actuator >> Removal

Park Brake Shoe Actuator: Removal

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear brake rotor. See REAR BRAKE ROTOR .
  2. Rotate the park brake adjuster nut until the bolt is in the closed position.
  3. Remove the park brake shoe retaining spring.
  4. Remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly.
  5. Remove the 2 actuator mounting bolts.
  6. Remove the actuator assembly from the dust shield.
scientia non olet · About LEMON Manuals