LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Warning Lamp Switch >> Installation

Park Brake Warning Lamp Switch: Installation

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake indicator switch.
  2. Install the park brake indicator switch screw. Tighten the park brake indicator switch screw to specification. See TORQUE SPECIFICATIONS .
  3. Install the park brake indicator switch electrical connector.
  4. Install the left-side door sill plate.
  5. Install the left-side instrument panel insulator.
scientia non olet · About LEMON Manuals