LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Backing Plate >> Installation

Brake Backing Plate: Installation

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the backing plate.
  2. Install the wheel bearing/hub. See appropriate REAR article in SUSPENSION.
  3. Install the wheel cylinder. See WHEEL CYLINDER .
  4. Install the park brake cable to the backing plate.
  5. Install the park brake cable to the park brake actuator.
  6. Install the brake shoes. See BRAKE SHOE .
  7. Install the brake drum. See BRAKE DRUM .
  8. Install the tire and wheel.
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals