Park Brake Warning Lamp Switch: Installation

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Install the park brake indicator switch. Install the park brake indicator switch screw. Tighten the screw to specifications. See TORQUE SPECIFICATIONS . Install the park brake indicator switch electrical connector. Install the left-side carpet retainer. Install the left-side instrument panel insulator.

Snap the I/P courtesy lamp into the I/P insulator.
Position the I/P insulator to the instrument panel.
Install the push-in retainers to the I/P insulator to instrument panel.
Install the press-on retainers to the I/P insulator to dash mat.