LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Rear Suspension System) >> Removal & Installation >> Body Mount (Rear) >> Removal

Body Mount (Rear): Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tires and the wheels.
  3. Use a block of wood at least seven inches long in order to support the exhaust and the rear of the support assembly.
  4. Remove the rear exhaust hangers.
  5. Remove the rear support assembly bolts and lower the support assembly and exhaust together.
  6. Remove the rear body mount bolts. See Fig 1.
  7. Remove the rear body mounts.
Fig 1: Removing/Installing Rear Body Mount
G00056083Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals