Zone 6
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition off and remove key.
- Remove fuse block cover. Remove SDM fuse (15-amp) from fuse block, located on right side of instrument panel.
- Remove passenger-side lower B-pillar trim panel. Remove Side Impact Sensor (SIS). See SIDE IMPACT SENSOR (SIS) under REMOVAL & INSTALLATION. Remove Connector Position Assurance (CPA) clip from SIS harness connector. Disconnect SIS harness connector.