Zone 7
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off and key is removed. Connect driver side impact air bag module and seat belt pretensioner connectors. See Figure. Install Connector Position Assurance (CPA) clips.
- Install SDM (15-amp) fuse located on right side of instrument panel. Install fuse block cover.
- Staying well away from air bag modules, turn ignition on. Check system for proper operation. See SYSTEM OPERATION CHECK .