LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 278 (Engine Controls - Theory & Operation - 3.8L) >> Self-Diagnostic Systems >> Description >> Warm-Up Cycle

Warm-Up Cycle

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Pontiac Grand Prix, 2003 Pontiac Bonneville, 2003 Chevrolet Monte Carlo, 2003 Chevrolet Impala, and 2003 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

The PCM uses warm-up cycles to run some diagnostics and to clear any Diagnostic Trouble Codes (DTCs). A warm-up cycle occurs when the engine coolant temperature increases 40°F (22°C) from the start-up temperature. The engine coolant must also achieve a minimum temperature of 160°F (71°C). The PCM counts the number of warm-up cycles to clear the Malfunction Indicator Lamp (MIL). The PCM will clear the DTCs when 40 consecutive warm-up cycles occur without a malfunction.