LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (Engine Controls - Removal & Installation) >> Air Induction Systems >> Bypass Valve Actuator >> Removal & Installation (VIN 1)

Removal & Installation (VIN 1)

WARNING: This page is about a different car, the 2003 Pontiac Bonneville, 2003 Buick Park Avenue, and 2003 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the boost control solenoid. See BOOST CONTROL SOLENOID . Disconnect the vacuum hose from the bypass valve actuator. See Figure.
  2. Remove the bypass valve actuator mounting bolts and rotate the bypass valve actuator until the rod disengages the lever. To install, reverse removal procedure. Tighten the bypass valve actuator mounting bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals