Output Shaft Speed Sensor 2.2L (M/T): Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Install OSS sensor. Install OSS retaining bolt. Tighten OSS sensor bolt to specification. See TORQUE SPECIFICATIONS . Connect OSS sensor electrical connector. Lower vehicle.

Fig 1: Locating OSS Sensor (2.2L M/T)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing/Installing OSS Sensor (2.2L M/T)

Courtesy of GENERAL MOTORS CORP.