LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Engine Controls - Removal & Installation) >> Air Induction Systems >> Air Cleaner Outlet Resonator/Duct Assembly >> Removal & Installation (2.2L)

Removal & Installation (2.2L)

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Intake Air Temperature (IAT) sensor connector. See Fig 1 . Loosen the clamp at the air cleaner assembly. Remove the push pin attachment from the outlet resonator/duct assembly to support bracket.
  2. Loosen the clamp at throttle body assembly. Disconnect the PCV fresh air vent hose at cam cover. Remove the outlet resonator/duct assembly. To install, reverse removal procedure. Tighten the outlet resonator/duct clamps to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Removing/Installing Outlet Resonator/Duct Assembly (2.2L)
G00217104Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Outlet Resonator/Duct Assembly (3.0L)
G00165017Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals