Trailing Arm: Installation
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Install the trailing arm to the trailing arm bracket. See Figure.
- Install the bolt and nut to the trailing arm and the trailing arm bracket. Tighten the bolt to 77 Ft. Lbs. (105 N.m).
- Install the trailing arm to the knuckle.
- Install the bolt and nut to the trailing arm and the knuckle. Tighten the nut to 52 Ft. Lbs. (70 N.m) plus 65 degrees.
- Lower the vehicle.