Secondary Air Injection Solenoid: Removal
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Secondary Air Injection Solenoid may also referred to as the Secondary Air Injection Vacuum Control Solenoid Valve.
Remove the vacuum lines from the Secondary Air Injection (AIR) solenoid. See Figure. Disconnect the electrical connector from the AIR solenoid. Remove the AIR solenoid to bracket screw. Remove the AIR solenoid from the bracket.