Idle Air Control Valve: Removal
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the EVAP canister purge valve. See EVAP CANISTER PURGE SOLENOID .
- Remove the electrical connector from the Idle Air Control (IAC) valve. See Figure.
- Remove the IAC valve attaching screws. Remove the IAC valve from the throttle body. Remove and discard the IAC valve "O" ring.