LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Engine Controls - Removal & Installation & Overhaul) >> Motors & Solenoids >> EVAP Canister Vent Valve >> Installation

EVAP Canister Vent Valve: Installation

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EVAP canister vent valve on the EVAP canister vent bracket. Pull on the valve to ensure tab is locked. Connect the EVAP vent hose to the EVAP canister vent valve.
  2. Connect the EVAP canister vent valve harness connector. Install the fuel tank. See FUEL TANK  under FUEL SYSTEMS.
scientia non olet · About LEMON Manuals