EVAP Canister Purge Solenoid: Removal
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Turn OFF the ignition. Disconnect the EVAP canister purge solenoid electrical connector. See Figure. Disconnect the EVAP canister purge solenoid pipe and vacuum supply hose. Remove the EVAP canister purge solenoid retaining bolt. Remove the EVAP canister purge solenoid from the intake manifold.