Fuel Pressure Regulator: Removal
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- The fuel pressure regulator is located on end of fuel rail. See Figure. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect the fuel pressure regulator vacuum line.
- Remove the fuel pressure regulator retaining screw. Using a shop towel to catch any spilled fuel, lift and twist the fuel pressure regulator in order to remove the fuel pressure regulator from the fuel rail. Remove the retainer and spacer bracket from the rail and discard.
- Remove the fuel pressure regulator from the engine fuel return pipe. Remove the fuel pressure regulator inlet "O" ring and discard.