LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Engine Controls - Removal & Installation & Overhaul) >> Emission Systems & Sub-Systems >> (EVAP) Hoses/Pipes-Chassis/Canister >> Removal & Installation (Long Wheel Base)

Removal & Installation (Long Wheel Base)

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel tank. See FUEL TANK  under FUEL SYSTEMS. Disconnect the Evaporative Emission (EVAP) purge pipe from the EVAP canister. Remove the EVAP purge pipe from the fuel tank retainer. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals