LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Engine Controls - Removal & Installation & Overhaul) >> Computerized Engine Controls >> Powertrain Control Module >> Installation

Powertrain Control Module: Installation

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the PCM electrical connectors to the PCM. Install the PCM into the air cleaner housing. Install the PCM cover to the air cleaner housing and tighten the bolts.
  2. Install the left front strut brace. Install the 3 strut brace retaining bolts. Tighten strut brace retaining bolts to specification. See TORQUE SPECIFICATIONS .
  3. Install the coolant reservoir. Be sure to check coolant system for proper level. If a new PCM is being installed, program the PCM. See POWERTRAIN CONTROL MODULE  under PROGRAMMING.
scientia non olet · About LEMON Manuals