Air Cleaner Intake Duct: Removal
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the 2 air cleaner intake duct clamps from the Mass Air Flow (MAF) sensor and the throttle body. Disconnect the Intake Air Temperature (IAT) sensor electrical connector. See Figure
- Disconnect the vent tube from the air cleaner intake duct. Disconnect the MAF sensor electrical connector. Unlatch the air cleaner cover clips and remove the air cleaner intake duct and air cleaner cover. Separate the air intake duct from the MAF sensor.