LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Engine Controls - Self-Diagnostics - 4.3L) >> Diagnostic Tests >> DTC P0443: EVAP Purge Solenoid Control Circuit >> Description

DTC P0443: EVAP Purge Solenoid Control Circuit: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Sonoma, 2003 GMC Safari, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

An ignition voltage is supplied directly to the Evaporative (EVAP) emission canister purge valve. The EVAP canister purge valve is Pulse-Width Modulated (PWM). The scan tool displays the amount of ON time as a percentage. The control module monitors the status of the driver. The control module controls the EVAP canister purge valve ON time by grounding the control circuit via an internal switch called a driver. If the control module detects an incorrect voltage for the commanded state of the driver, this DTC sets.

scientia non olet · About LEMON Manuals