LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Cruise Control System) >> Removal & Installation >> Cruise Release Switch >> Removal

Cruise Release Switch: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left insulator panel.
  2. Twist the cruise control release switch (5) counterclockwise and remove from the bracket (1). See Figure.
  3. Disconnect the electrical connector from the switch.