LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle)) >> Repair Instructions >> Valve Lifter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower intake manifold. Refer to Intake Manifold Replacement - Upper .
  2. Remove the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
  3. Remove the intake manifold oil splash shield.
    Fig 1: Intake Manifold Oil Splash Shield
    G01763596Courtesy of GENERAL MOTORS CORP.
  4. Remove the lifter guide bolts.
  5. Remove the valve lifter guides.
  6. Remove the valve lifters.
  7. Clean all gasket surfaces with degreaser.
  8. Clean the valve train parts.
  9. Inspect the valve lifters and the cam lobes for wear. Refer to VALVE LIFTERS CLEANING AND INSPECTION .
    Fig 2: Valve Components
    G01763597Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals