Vehicle Speed Sensor: Installation
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Install the "O" ring (11) to the vehicle speed sensor (10). See Figure .
- Install the vehicle speed sensor (10) to the extension case.
- Install the vehicle speed sensor bolt (9). See Figure . Tighten the vehicle speed sensor bolt (9) to specification. See TORQUE SPECIFICATIONS .
- Install the vehicle speed sensor wiring harness connector.
- Install the right engine splash shield.
- Install the right front tire and wheel assembly.
- Lower the vehicle.