LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Automatic Transmission Servicing) >> Removal & Installation >> Fluid Filler Tube >> Removal

Fluid Filler Tube: Removal

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil indicator from the filler tube.
  2. Remove the air cleaner assembly.
  3. Remove the retaining nut from the EGR at the top of the filler tube. See Fig 1 .
  4. Remove the lower retaining bolt at the base of the filler tube.
  5. Remove the fluid filler tube.
  6. Remove the fluid filler tube seal. See Fig 2 .
Fig 1: Removing & Installing Fluid Filler Tube
G00087756Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Fluid Filler Tube Seal
G00087757Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals