Fluid Filler Tube: Installation
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
DO NOT place the fluid filler tube seal on the fluid filler tube when installing the tube or damage to the seal will result.
- Install the fluid filler tube seal in the transaxle. See Figure .
- Position the fluid filler tube into the transaxle.
- Install the fluid filler tube bracket bolt through the fluid filler tube bracket. See Figure . Tighten the fluid filler tube bracket bolt to specification. See TORQUE SPECIFICATIONS .
- At the top of the filler tube, install the retaining nut to the filler tube the EGR at the top of the filler tube.
- Install the air cleaner assembly.
- Inspect for proper fluid level. See CHECKING FLUID LEVEL & CONDITION under LUBRICATION. Inspect for fluid leaks.