LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Automatic Transmission Servicing) >> Lubrication >> Oil Cooler Flushing >> Clean-up

Oil Cooler Flushing: Clean-up

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the water supply hose (7) from the transaxle oil cooler and line flusher and bleed any remaining air pressure from the flusher tank (4). See Figure .
  2. Remove the fill cap (9) from the transaxle oil cooler and line flusher and return any unused flushing solution to its container. Rinse the transaxle oil cooler and line flusher with water. DO NOT store the transaxle oil cooler and line flusher with flushing solution in it.
  3. After every 3rd use, clean the transaxle oil cooler and line flusher as described in the instructions included with the tool.
  4. Dispose of any waste water/solution and transaxle fluid in accordance with local regulations.
scientia non olet · About LEMON Manuals