LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Servicing - A/T (VT25-E)) >> Removal & Installation >> Variable Drive Pulley Opening Cover >> Removal

Variable Drive Pulley Opening Cover: Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove bolts from drive pulley cover.
  2. Remove drive pulley cover.
  3. Remove variable drive pulley opening cover seal (outer) and discard.
  4. Remove variable drive pulley opening cover seal and discard. See Fig 1 .
Fig 1: Removing & Installing Variable Drive Pulley Cover
G00078073Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals