LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Servicing - A/T (VT25-E)) >> Removal & Installation >> Transaxle Oil Cooler >> Installation

Transaxle Oil Cooler: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clip transaxle oil cooler to radiator. See Figure .
  2. Clip condenser to radiator.
  3. Install upper CRFM bracket assemblies. See Figure .
  4. Install condenser splash shield. See Figure .
  5. Install battery box inlet air duct. See Figure .
  6. Install oil cooler line-to-radiator bracket bolt.
  7. Connect transaxle oil cooler lines to radiator. Tighten the transaxle cooler line fittings to specification. See TORQUE SPECIFICATIONS  .
  8. Install front fascia. See FRONT FASCIA  .
scientia non olet · About LEMON Manuals