Removal & Installation (Impala)
WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Remove door trim panel. See DOOR TRIM PANEL . Remove water deflector. Place window in full up position. Remove inside handle rods from inside door handle. Remove clip securing inside handle rods to door.
- Unsnap outside handle rod-to-lock clip from lock. Remove door-to-door lock screws. Remove lock from door with inside handle rods attached. Disconnect lock harness connectors. Remove inside handle rods from lock. To install, reverse removal procedure. Tighten door-to-door lock screws to 89 INCH lbs. (10 N.m).