LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Drive Axles) >> Removal & Installation >> Output Shaft Seal Replacement >> Installation

Output Shaft Seal Replacement: Installation

WARNING: This page is about a different car, the 2003 Chevrolet Corvette and 2002 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Using the Output Shaft Seal Installer (J 36797), install the differential output shaft seal. Install the axle shaft. See AXLE SHAFTS . Install the rear tire and wheel assembly. Tighten wheel lug nuts to specification. See TORQUE SPECIFICATIONS . Lower the vehicle.

scientia non olet · About LEMON Manuals