LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Automatic Transaxle Removal & Installation) >> Removal & Installation >> Engine Mount Strut Bracket >> Removal (3.8L)

Removal (3.8L)

WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt and the nut from the right engine mount strut at the right engine mount strut bracket on the engine. See Fig 1 .
  2. Remove the bolt and the nut from the right engine mount strut at the right engine mount strut bracket on the upper radiator support. See Fig 2 .
  3. Remove the engine mount strut.
    Fig 1: Removing/Installing Right Engine Mount Strut & Strut Bracket (3.8L)
    G00199835Courtesy of GM
    Fig 2: Removing/Installing Bolt & Nut From Right Engine Mount Strut Bracket
    G00199836Courtesy of GM
  4. Inspect the rubber in the engine mount strut for the following conditions:
    • Hardness
    • Splitting
    • Cracking