LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Engine Mechanical - 4.0L (On-Vehicle)) >> Repair Instructions >> Oil Level Indicator and Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace the oil level indicator tube O-ring.
  2. Install the oil level indictor tube.
    CAUTION: Refer toFASTENER NOTICE .
  3. Install the AIR valve bracket bolt.

    Tighten 

    • Tighten the oil level indicator tube nut to 10 N.m (89 in lbs)
    • Tighten the secondary AIR valve bracket bolt to 9 N.m (80 in lbs).
  4. Install the oil level indicator.
    Fig 1: Installing Oil Level Indicator & Tube
    G01819266Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals