Removal & Installation
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
IAT sensor is located in air cleaner resonator. See Fig 1. Turn ignition switch to OFF position. Disconnect negative battery cable. Disconnect the air cleaner duct from the air cleaner resonator. Disconnect the IAT sensor harness connector. While twisting the IAT sensor, pull the sensor from the air cleaner resonator. To install, reverse removal procedure. Tighten air cleaner duct-to-air cleaner resonator clamp to specification. See TORQUE SPECIFICATIONS .