Crankshaft Position Sensor: Removal
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Crankshaft Position (CKP) sensor is located on the right front of engine, above starter.
- Disconnect the battery.
- Raise and support the vehicle.
- Remove the front air deflector, if applicable.
- Remove the starter.
- Disconnect the Crankshaft Position (CKP) sensor harness connector.
- Remove the CKP sensor bolt and CKP sensor. See Fig 1.