Low Pressure Lock-Off Solenoid: Removal
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Low Pressure Lock-Off (LPL) solenoid is mounted in the Intermediate pressure line. See Figure. Release CNG fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE (CNG) under FUEL SYSTEMS (CNG).
- Remove the battery, air cleaner outlet duct and the air cleaner assembly.
- Disconnect the fuel line from the LPL fuel inlet elbow. See Figure.
- Remove the fuel rail feed hose hold-down nut and retainer. See Fig 1.
- Remove the fuel feed hose from the LPR using a twisting motion.
- Disconnect the LPL harness connector.
- Remove the LPR/LPL mounting bracket nuts. See Fig 1.
- Remove the LPR/LPL assembly from the vehicle.
- Remove the LPR and LPL mounting bolts.
- Remove the LPR/LPL assembly from the mounting bracket.
- While holding the union with a wrench, rotate the LPL to separate the components. See Fig 2.