LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Engine Control System - Removal & Installation) >> Motors, Relays & Solenoids >> EVAP Pressure Switching Solenoid >> Installation

EVAP Pressure Switching Solenoid: Installation

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the EVAP pressure switching solenoid and the EVAP control system for carbon particle contamination before replacing the EVAP pressure switching solenoid.
  2. Install EVAP pressure switching solenoid (1) to EVAP canister (3).
  3. Install bolt (2).
  4. Connect the 2 vapor hoses.
  5. Connect pressure switching solenoid (1) harness connector.
  6. Install EVAP canister (3).
scientia non olet · About LEMON Manuals