LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Disc Brakes) >> Removal & Installation >> Power Brake Booster Check Valve /Hose >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix and 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 fuel injector sight shield nuts at the front of the fuel injector sight shield. Lift the fuel injector sight shield up at the front and slide out of the engine bracket.
  2. Disconnect the power brake booster hose from the intake manifold.
  3. Disconnect the power brake booster hose from power brake booster check valve.
  4. Remove the power brake booster check valve from the power brake booster.
  5. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals