LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Disc Brakes) >> Adjustments & Inspections >> Brake Pipe & Hose Inspection

Brake Pipe & Hose Inspection

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix and 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Visually inspect all of the brake pipes for the following conditions:
    • Kinks, improper routing, missing or damaged retainers.
    • Leaking fittings, excessive corrosion.
  2. If any of the brake pipes exhibited any of the conditions listed, then the identified pipe, or pipes, require replacement.
  3. Ensure that the vehicle axles are properly supported at ride height in order to maintain the proper relationship of the flexible brake hoses to the chassis.
  4. Visually inspect all of the flexible brake hoses for the following conditions:
    • Kinks, improper routing, twists, chafing, missing or damaged retainers.
    • Leaking connections, cracking, dry-rot, blisters, bulges.
  5. If any of the flexible brake hoses exhibited any of the conditions listed, then the identified flexible brake hose, or hoses require replacement.
  6. Squeeze the flexible brake hoses with firm finger pressure to check for soft spots, indicating an internal restriction. Check the entire length of each flexible brake hose.
  7. If any of the flexible brake hoses were found to have soft spots, then the identified flexible brake hose, or hoses require replacement.