LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> Transaxle Internal Wiring Harness >> Installation

Transaxle Internal Wiring Harness: Installation

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wiring harness. See Figure .
  2. Install the wiring harness to the solenoid valve(s), TFP manual valve position switch and/or the temperature sensor.
  3. Install the case side cover. See REMOVAL & INSTALLATION in SERVICING - CENTURY & REGAL article.
scientia non olet · About LEMON Manuals