LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Automatic Transaxle Diagnosis - 4T65-E) >> Removal & Installation >> STOPLAMP Switch >> Removal

STOPLAMP Switch: Removal

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left side of the instrument panel (I/P) insulator.
  2. Disconnect the electrical connector from the stop lamp switch.
  3. Remove the stoplamp switch (2) from the brake pedal bracket. See Fig 1 .
Fig 1: Locating Stoplamp Switch
G00073409Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals