LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems (Gasoline) >> Throttle Body (SFI) >> Removal & Installation (2.2L)

Removal & Installation (2.2L)

  1. Disconnect negative battery cable. Remove air cleaner resonator from throttle body. Disconnect IAC valve and TP sensor harness connectors from throttle body. Disconnect vacuum hose from throttle body.
  2. Disconnect accelerator and cruise control cables from throttle body. Remove accelerator cable bracket. Remove throttle body retaining bolts. Remove throttle body from intake manifold. Remove flange gasket and discard.
  3. Clean gasket surface on intake manifold and throttle body. Install NEW flange gasket. Install throttle body assembly. Install throttle body bolts and tighten to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals