LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems (Diesel) >> Fuel Pump >> Removal & Installation

Removal & Installation

  1. Fuel pump is located in fuel tank and is integral with fuel sending unit assembly. Fuel pump must be replaced with fuel sending unit as an assembly. Remove fuel filler cap. Disconnect negative battery cable. Drain fuel tank.
  2. Raise and support vehicle. Disconnect fuel lines and electrical connections at fuel tank. Remove fuel tank. Using Cam Lock Remover (J-36608), turn cam lock counterclockwise. Lift fuel sending unit assembly from fuel tank. To install, reverse removal procedure using NEW "O" ring and gasket.